Skip to main content

Free electrical invoice template

Electrical Invoice Template

Electrical work is mostly invisible once the cover plates go back on, so the invoice has to do the explaining. Wire size and length, breaker ratings, the permit and the test results turn “one new outlet in the garage” into a price the customer understands. This sample is a Level 2 EV charger circuit plus three kitchen GFCI replacements, itemized the way an electrician would want to defend it.

By the Invoice Link team · Last updated

No sign-up. The Word file opens in Google Docs too: upload it to Google Drive, then choose Open with → Google Docs.

The filled-in sample

A new 240 V EV circuit itemized by breaker, wire run and labor, device replacements priced per unit, the permit passed through, and a test-results table.

Wattleby Electric LLC

Licensed electrical contractor · Lic. #EC-00000

48 Commerce Loop
Oak Haven, GA 30500
(706) 555-0128 · office@wattleby.example

Invoice

No.
INV-1508
Date
November 11, 2026
Terms
Due on receipt

Bill to

Kevin Osei

1205 Birchwood Dr
Oak Haven, GA 30500
(706) 555-0176 · k.osei@example.com

Permit:
E-26-03118
Inspection:
Passed Nov 11, 2026

Level 2 EV charger circuit and kitchen GFCI replacements

DescriptionAmount
60 A two-pole breaker
1 ea × $78.00
$78.00
6 AWG copper conductors in EMT conduit
Panel to garage wall, surface-mounted
46 lin ft × $9.50
$437.00
EV circuit labor
Load calculation; run circuit; mount and terminate the customer-supplied charger; test
1 job × $520.00
$520.00
GFCI receptacle replacement, kitchen countertop
Device included
3 ea × $95.00
$285.00
Panel directory updated and circuits labeled
Included
1 ea × $0.00
$0.00
Electrical permit and inspection (passed through at cost)
1 ea × $110.00
$110.00
Subtotal
$1,430.00
Sales tax (example rate 7%)
$36.05
Total
$1,466.05
Balance due
$1,466.05

Test results

TestResult
Voltage at charger terminals241 V
Charger current limit set to48 A (continuous load on a 60 A circuit)
Kitchen GFCIs (3)Trip and reset correctly

Notes and terms

  • Load calculation done before install: the existing 200 A service has capacity for the new circuit.
  • Workmanship warranty: 1 year on our wiring and terminations. The charger's warranty is with its manufacturer (customer-supplied).
  • Payment due on receipt.

How to pay: Card or bank transfer (ACH) through the pay link.

Customer signature — work completed

Date

Sample invoice — every name, address and price on it is fictional, and the tax is an example: which lines are taxable depends on your state.Template from invoicelinkapp.com

Sample prices are illustrative, not a price guide. Replace them with your own rates.

What to itemize on an electrical invoice

  • Devices by count and type: “3 GFCI receptacles,” “2 AFCI breakers.” Per-device lines are how customers check the work against what they asked for.
  • Wire and conduit by size and length. Forty-six feet of 6 AWG in conduit explains a price that “one outlet” doesn't.
  • Breakers and panel work separately from device work.
  • Permit and inspection, with the permit number and inspection date. For many jobs the passed inspection is the customer's proof the work was done to code.
  • Troubleshooting time at your hourly rate, kept apart from the repair once you've found the fault.
  • Test results: voltage, GFCI or AFCI trip tests, or the current limit you set on an EV charger.

How electricians price work

  • Per device or per task. Outlets, switches, fixtures, ceiling fans and breakers priced per unit, normal materials included. Good for remodel and add-on work where the customer counts items.
  • Time and materials. Hourly labor plus materials for troubleshooting and old-house work, where nobody can see the wiring until it's opened.
  • Project price. Panel upgrades, service changes, EV circuits and remodel wiring are usually priced as a project after a site visit, from an estimate the customer signs.
  • Service call minimum. A minimum charge (often written as “first hour”) covers the drive and setup. Show it as its own line.

Panel and EV work: details customers and inspectors ask for

  • The service size and whether a load calculation was done. For EV charging, put the circuit size and the current limit you set on the charger on the invoice — an EV charger is a continuous load, so the charger's setting has to fit the circuit.
  • Which code edition your jurisdiction enforces. Requirements such as where GFCI and AFCI protection is needed depend on it, so don't promise code items you haven't confirmed with the local inspector.
  • Utility coordination. A service upgrade may need the utility to disconnect and reconnect; their scheduling and fees are separate from yours.

Before you send it

  • Permit number and inspection date
  • Device counts and wire runs
  • Test results (voltage, GFCI/AFCI tests, charger current setting)
  • Updated panel directory
  • Warranty terms
  • Photos of the panel before the cover went back on

Electrical invoice questions

Should an electrician's invoice list the wire gauge?

Yes for anything beyond a simple device swap. Wire size and length explain the price of a new circuit, and they're useful to the next electrician or a home inspector.

How do I bill troubleshooting that didn't find the problem?

Bill the time you spent at your hourly rate, with a short note of what you tested and ruled out. That note is often what the customer needs to decide the next step.

Do I need the permit number on the invoice?

It's good practice whenever the job had a permit. Customers need it when they sell the house or file an insurance claim, and it shows the work was inspected.

How do I invoice an EV charger the customer bought themselves?

Bill the circuit and the installation, and note that the charger was customer-supplied. Its warranty sits with its manufacturer; yours covers your wiring and workmanship.

Can I charge a minimum for small jobs?

Yes, if it's in your terms before you start. A minimum covers the drive, setup and supply-house run that even a ten-minute device swap takes. Show it as its own line.

How we made this template

The sample business, customer, addresses and prices are fictional; they show how a electrical invoice is laid out, not what to charge. We used AI tools to help draft and check this page; every rule or standard it names, and every number that isn't sample math, links to its source. Spot something wrong? Email support@invoicelinkapp.com.

Skip the paperwork

Send this invoice from your phone — and get paid

Invoice Link builds an invoice like this on your phone in a couple of minutes, then texts it to your customer with a link to pay.

  • Texts estimates and invoices from your own phone number
  • On-site customer signatures on estimates; job photos on estimates and invoices
  • AI drafts estimates and invoices in English or Spanish
  • Card and bank-transfer (ACH) payments for US businesses
  • 10 contractor invoice designs

Free for 14 days

Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).

Start your free trial
Download on the App StoreGet it on Google Play

Just need a PDF? Use the free invoice generator.

Our mission

Every tradesperson deserves to get paid the day the job is done.