Skip to main content

Free insulation invoice template

Insulation Invoice Template

Insulation is one of the few trades where federal rules spell out what your receipt must say. Under the FTC's R-Value Rule, installers have to give customers a dated, signed receipt with the coverage area, thickness and R-value — and for loose-fill, the settled thickness and the number of bags. This sample is an attic air-sealing and blown-in job with those fields built into the invoice.

By the Invoice Link team · Last updated

No sign-up. The Word file opens in Google Docs too: upload it to Google Drive, then choose Open with → Google Docs.

The filled-in sample

An attic job invoiced as air sealing, baffles, blown-in insulation at a stated R-value and hatch work, with an installer-signed record that carries every field the FTC rule requires for loose-fill.

Thermal Line Insulation

Attics · Walls · Crawlspaces · Air sealing

604 Furnace St
Kingsfield, KY 40300
(859) 555-0166 · office@thermalline.example

Invoice

No.
INV-0397
Date
November 11, 2026
Terms
Due on completion

Bill to

Rosalind Meyer

1504 Buckeye Ln
Kingsfield, KY 40300
(859) 555-0124 · r.meyer@example.com

Attic air sealing and blown-in insulation — R-49 added

DescriptionAmount
Attic air sealing
Top plates, plumbing and wiring penetrations, chase openings, light boxes
1 job × $650.00
$650.00
Rafter baffles at the eaves
26 ea × $6.50
$169.00
Blown fiberglass insulation, R-49 added
Over the existing layer (about R-11), for about R-60 in total
1,250 sq ft × $1.55
$1,937.50
Attic hatch: insulated cover, dam and weatherstrip
1 ea × $125.00
$125.00
Subtotal
$2,881.50
Total
$2,881.50
Balance due
$2,881.50

Installation record (FTC R-Value Rule, 16 CFR 460.17)

ItemValue
Coverage area1,250 sq ft
Insulation typeLoose-fill fiberglass
Initial installed thickness17.5 in. (from the product's bag chart)
Minimum settled thickness17 in. (from the product's bag chart)
R-valueR-49
Number of bags used41

Notes and terms

  • Installation record dated and signed by the installer below; a matching attic card is stapled near the hatch.
  • No sales tax line: many states treat a contractor who installs materials as their consumer, taxed when the materials are bought — check your state's rules.
  • Workmanship warranty: 1 year.

How to pay: Card or bank transfer (ACH) through the pay link, or check.

Installer signature — installation record above

Date

Customer signature — work completed

Date

Sample invoice — every name, address and price on it is fictional.Template from invoicelinkapp.com

Sample prices are illustrative, not a price guide. Replace them with your own rates.

What to itemize on an insulation invoice

  • Air sealing as its own line, with what you sealed — customers can't see it once the insulation goes in.
  • Insulation by area and target R-value: type, square feet and the R-value you installed to.
  • Prep: baffles, hatch dams, and blocking around flues and fixtures where required.
  • Removal of old insulation, if any, by area.
  • Hatch or attic-door insulation and weatherstripping.

What the FTC requires on your receipt

The FTC's R-Value Rule (16 CFR 460.17) requires installers to give customers a receipt for the insulation they install, and spells out what it shows:

  • Standard insulation: the coverage area, thickness and R-value.
  • Loose-fill: the coverage area, initial installed thickness, minimum settled thickness, R-value and the number of bags used.
  • Every receipt: dated and signed by the installer.

Put these fields on the invoice, or on a signed installation record attached to it, and you've met the rule and given the customer what an energy auditor or a future buyer will ask for.

Pricing to a target R-value

Blown and batt insulation is usually priced per square foot at a target R-value, with air sealing, baffles and removal as separate lines. ENERGY STAR publishes recommended levels by climate zone, based on the 2021 IECC — in zones 4A and 4B, for example, it recommends adding R-60 to an uninsulated attic, or R-49 to one that already has 3–4 inches of insulation. Quote to a target, and show that target on the invoice.

Before you send it

  • Coverage area, thickness and R-value
  • Loose-fill: settled thickness and bag count
  • Installer's signature and date
  • Air sealing listed with what was sealed
  • Baffles and hatch work
  • Attic card posted

Insulation invoice questions

What does the FTC require on an insulation invoice?

A receipt, dated and signed by the installer, showing the coverage area, thickness and R-value — and for loose-fill, the initial installed thickness, the minimum settled thickness and the number of bags used (16 CFR 460.17).

Should air sealing be a separate line?

Yes. It's different work from insulating, and the customer can't see it once the insulation is in place, so list what you sealed.

How should I price insulation work?

Per square foot at a target R-value for blown and batt insulation, with air sealing, baffles and removal of old material as separate lines.

What R-value should I quote?

Use your local energy code and ENERGY STAR's recommendations for the climate zone as the guide, and quote to the target the customer chooses.

Do I need an attic card?

Many jurisdictions and programs expect a card or certificate near the attic access showing the insulation type, R-value and depth. It also keeps the FTC receipt information with the house for future owners.

Sources

Checked November 16, 2026. Prices and rules change — confirm with the source before you rely on them.

How we made this template

The sample business, customer, addresses and prices are fictional; they show how a insulation invoice is laid out, not what to charge. We used AI tools to help draft and check this page; every rule or standard it names, and every number that isn't sample math, links to its source. Spot something wrong? Email support@invoicelinkapp.com.

Skip the paperwork

Send this invoice from your phone — and get paid

Invoice Link builds an invoice like this on your phone in a couple of minutes, then texts it to your customer with a link to pay.

  • Texts estimates and invoices from your own phone number
  • On-site customer signatures on estimates; job photos on estimates and invoices
  • AI drafts estimates and invoices in English or Spanish
  • Card and bank-transfer (ACH) payments for US businesses
  • 10 contractor invoice designs

Free for 14 days

Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).

Start your free trial
Download on the App StoreGet it on Google Play

Just need a PDF? Use the free invoice generator.

Our mission

Every tradesperson deserves to get paid the day the job is done.