Skip to main content

Free garage door invoice template

Garage Door Invoice Template

A broken spring is the classic garage door call, and the invoice for it raises two questions: why both springs, and how long is it guaranteed. This sample answers both on paper — the matched pair with its cycle rating, warranties split by component — and records the safety-reverse checks that show the door left your hands working safely.

By the Invoice Link team · Last updated

No sign-up. The Word file opens in Google Docs too: upload it to Google Drive, then choose Open with → Google Docs.

The filled-in sample

A spring replacement invoice: the service call, a matched pair of springs with their cycle rating, cables and rollers by count, installation labor, and a table of safety checks after the repair.

Liftright Garage Doors

Springs · Openers · New doors

1720 Overhead Ln
Falcon Ridge, NV 89000
(702) 555-0122 · service@liftright.example

Invoice

No.
INV-1647
Date
November 14, 2026
Terms
Due on completion

Bill to

Trevor Haynes

8803 Canyon Wren Dr
Falcon Ridge, NV 89000
(702) 555-0161 · t.haynes@example.com

Broken torsion spring — springs, cables and rollers replaced

DescriptionAmount
Service call
1 ea × $89.00
$89.00
Torsion springs, matched pair, 20,000-cycle rating
Sized to the door's weight; both replaced so they wear evenly
1 pair × $285.00
$285.00
Lift cables
1 pair × $45.00
$45.00
Nylon rollers, sealed bearings
10 ea × $9.00
$90.00
Spring installation labor
1 job × $165.00
$165.00
Tune-up: balance, lubricate, adjust opener force
Included with spring replacement
1 ea × $0.00
$0.00
Subtotal
$674.00
Sales tax (example rate 8.375%)
$35.18
Total
$709.18
Balance due
$709.18

Safety checks after the repair

CheckResult
Door balance (manual, held at halfway)Stays in place
Photo-eye reversalReverses
Contact reversal on an obstructionReverses
Opener force settingsAdjusted to the new springs

Notes and terms

  • Warranty: springs 3 years; other parts 1 year; labor 90 days.
  • Test the auto-reverse monthly the way your opener's manual describes — usually with a 2×4 laid flat on the floor under the door.

How to pay: Card or bank transfer (ACH) through the pay link.

Customer signature — work completed

Date

Sample invoice — every name, address and price on it is fictional, and the tax is an example: which lines are taxable depends on your state.Template from invoicelinkapp.com

Sample prices are illustrative, not a price guide. Replace them with your own rates.

What to itemize on a garage door invoice

  • Springs by type, size and cycle rating, and a note when a pair was replaced together.
  • Cables, rollers, hinges, drums and bearings by count.
  • Opener work: the model, and what you installed or adjusted (logic board, gear kit, sensors, wall button, keypad).
  • The service call or trip fee as its own line.
  • Safety checks after the repair: balance and auto-reverse tests.
  • Warranties by component, with their lengths.

How garage door companies price work

  • Service call plus parts and labor for repairs, with springs often priced as a flat package.
  • Spring options by cycle rating, presented as good, better and best — higher cycles, longer warranty.
  • Opener installations as the opener plus installation, accessories and haul-away of the old unit.
  • New doors by size, model and insulation, with removal and disposal of the old door.

Safety checks worth writing down

The federal safety standard for residential garage door openers, 16 CFR Part 1211, applies to openers made for sale in the United States since January 1, 1993. It requires the opener to reverse when the door hits an obstruction, plus a second form of entrapment protection — an external photo-eye, an edge sensor, or a wall control that has to be held down to close. Spring and force adjustments can change how the door behaves, so test the reversal after every repair and record the result.

Before you send it

  • Spring type, size and cycle rating
  • Parts by count
  • Balance test result
  • Photo-eye and contact reversal results
  • Warranties by component
  • Monthly test reminder for the customer

Garage Door invoice questions

Should both springs be replaced if only one broke?

On two-spring doors, both springs have been through the same number of cycles, so replacing both together is common practice. Explain it on the invoice so it doesn't read as an upsell.

What does a spring's cycle rating mean?

How many open-and-close cycles the spring is rated for. Putting it on the invoice lets the customer compare options and understand the warranty.

Why test the auto-reverse after a repair?

Residential openers are required to reverse on an obstruction (16 CFR 1211). New springs and force adjustments can change that behavior, so test it and record the result.

How do I invoice an opener installation?

The opener with its model, installation labor, any new wall button or keypad, and removal of the old opener — each as a line — plus the safety-reverse test result.

How should warranties appear on the invoice?

By component — springs, other parts, labor — each with its length. Customers remember “lifetime warranty” and forget the exceptions.

Sources

Checked November 16, 2026. Prices and rules change — confirm with the source before you rely on them.

How we made this template

The sample business, customer, addresses and prices are fictional; they show how a garage door invoice is laid out, not what to charge. We used AI tools to help draft and check this page; every rule or standard it names, and every number that isn't sample math, links to its source. Spot something wrong? Email support@invoicelinkapp.com.

Skip the paperwork

Send this invoice from your phone — and get paid

Invoice Link builds an invoice like this on your phone in a couple of minutes, then texts it to your customer with a link to pay.

  • Texts estimates and invoices from your own phone number
  • On-site customer signatures on estimates; job photos on estimates and invoices
  • AI drafts estimates and invoices in English or Spanish
  • Card and bank-transfer (ACH) payments for US businesses
  • 10 contractor invoice designs

Free for 14 days

Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).

Start your free trial
Download on the App StoreGet it on Google Play

Just need a PDF? Use the free invoice generator.

Our mission

Every tradesperson deserves to get paid the day the job is done.