Pricing guides and how-tos for contractors
What plumbers, electricians, painters, handymen and other trades charge, what moves the price, and how to put it on an estimate or invoice. Every number links to its source (government wage data, building codes, manufacturers' specs and published cost guides) with that source's own date, so you can see how current it is.
By the Invoice Link team · Reviewed
What to charge
Rates, fees and price ranges by trade, with the factors that push a job up or down.
Plumbing
Plumber hourly rate: what plumbers charge in 2026 and how to set yours
Published plumber rates run from about $25 to $200 an hour, about $100 on average. The ranges by license level, service call and after-hours charges, and how to work out your own number.
Read the guide →Electrical
Electrician hourly rate: what electricians charge in 2026, minimums and permits
Most electricians bill $40 to $130 an hour, but on small jobs the minimum matters more than the rate. Rates by license level, minimums, emergency charges and permits.
Read the guide →HVAC
HVAC service call fee: what to charge for a diagnostic visit in 2026
Published HVAC service call fees run from $75 to $200. Whether to credit the fee toward the repair, what labor costs after the diagnosis, and after-hours premiums.
Read the guide →Painting
How to price a paint job: measure, estimate paint and labor, then check the market
Measure the walls, work out gallons and hours, then check your number against published per-square-foot and per-room prices, with a fully worked bedroom example.
Read the guide →Drywall
How much to charge for drywall repair: price the visits, not the hole
Published prices for the same small hole run from $60 to $500. Why, how drying time and return trips should set your minimum, and how to write finish level and texture into the quote.
Read the guide →Handyman
How to price handyman jobs: hourly rates, flat prices and minimums
Handymen bill about $50 to $100 an hour, but many jobs are priced as tasks. Published task prices, how to set minimums and trip charges, and the license limits that cap how big a job you can take.
Read the guide →Lawn care
How much to charge for lawn mowing: per cut, per acre and per season
A quarter-acre cut runs about $41 to $61. Prices by lawn size, per acre and per hour, minimums and long-grass fees, plus how to price the whole season instead of one cut.
Read the guide →Pressure washing
How to price pressure washing jobs: by surface, square foot and story
Driveways, house washes, decks, roofs and gutters: what each surface sells for, per-square-foot and hourly rates, minimums, and where your wash water is allowed to go.
Read the guide →
Estimates, invoices and getting paid
Step-by-step help with the paperwork: measuring and writing an estimate, invoicing, deposits and setting your rate.
Roofing
How to write a roofing estimate: measure in squares, list materials, price every line
Measure the roof in squares, add the manufacturers' 10–15% waste, list every material and code item, price each line, and write the unknowns (rotten decking, extra layers) into the estimate.
Read the guide →Handyman
What to include on a handyman invoice: every field, and why it's there
The fields every handyman invoice needs, the tax details most templates skip (sales tax on labor, W-9s and the new $2,000 1099 threshold), and how long the IRS says to keep copies.
Read the guide →All trades
How much deposit should a contractor ask for? Typical amounts and state limits
Modest deposits are the norm, and some states cap them: California at $1,000 or 10%, whichever is less. The state rules, the FTC's three-day cancellation rule, and a progress-payment schedule that keeps you paid.
Read the guide →All trades
How to calculate your hourly rate as a contractor
Your pay plus what an employer would add, your overhead, divided by the hours you can actually bill, plus profit. A full worked example using 2026 IRS and BLS figures.
Read the guide →
Skip the paperwork
Send this invoice from your phone — and get paid
Invoice Link builds estimates and invoices on your phone in a couple of minutes, then texts them to your customer with a link to approve or pay.
- Texts estimates and invoices from your own phone number
- On-site customer signatures on estimates; job photos on estimates and invoices
- AI drafts estimates and invoices in English or Spanish
- Card and bank-transfer (ACH) payments for US businesses
- 10 contractor invoice designs
Free for 14 days
Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).
Start your free trial