Electrical · Pricing guide
Electrician hourly rate: what electricians charge in 2026, minimums and permits
Published 2026 cost guides put most electricians between $40 and $130 an hour[1][2], with masters at $90–$120 (This Old House)[1] and $90–$130 and up (HomeGuide)[2]. On small jobs the hourly rate is only half the story: many electricians charge a minimum equal to one to four hours of work[1], and permits and inspections are their own line. For comparison, the median employee electrician earned $30.38 an hour in May 2025[3].
By the Invoice Link team · Reviewed · 4 sources
The short answer
Electrician rates by license level
Two of the big cost guides publish bands by license level. This Old House doesn't say where its figures come from, and HomeGuide's bands run a little wider:
| Level | This Old House | HomeGuide |
|---|---|---|
| Apprentice | This Old House$40–$60[1] | HomeGuide$40–$70[2] |
| Journeyperson | This Old House$60–$90[1] | HomeGuide$50–$100[2] |
| Master | This Old House$90–$120[1] | HomeGuide$90–$130+[2] |
| Emergency | This Old HouseSee after-hours below | HomeGuide$150–$200[2] |
| Commercial | This Old House— | HomeGuide$100–$150 (its rate table says $100–$130)[2] |
Source dates: This Old House Jun 5, 2026; HomeGuide Feb 12, 2026.
BLS figures are wages, not rates: the median electrician employee made $63,190 in May 2025, with the lowest 10% under $42,640 and the top 10% over $108,510[3]. They leave out self-employed electricians, whose rate also has to carry their own taxes, insurance, vehicle and unbilled time.
Minimums, service calls and trip fees
Swapping one outlet takes twenty minutes; getting to the house, parking, finding the panel and cleaning up takes longer. That's why most electricians set a minimum price for small jobs, to make the travel time worth it[1]. The published structures:
- A minimum. Typically a flat rate equal to one to four hours (This Old House)[1]; HomeGuide says most electricians charge a one-to-two-hour minimum or add a service call fee to the first hour[2].
- A service call that includes the first hour. $100–$200[2].
- A separate trip fee. Some electricians charge a $40–$100 call-out or trip fee that isn't applied to the first hour[2].
A minimum is easier to defend when it buys the customer something. Put it in the booking text as "one-hour minimum, includes up to three small items" and the customer starts bundling (the ceiling fan, the dead outlet, the dimmer) instead of calling you back three times.
Worked example
What a one-outlet call costs you (example inputs, not a price guide)
- Drive: 12 miles each way, 24 miles round trip
- Vehicle cost at the IRS business rate for July–December 2026, 76¢ a mile[4]: 24 × $0.76 = $18.24
- Your time: 1 hour of driving + 30 minutes on site = 1.5 hours
- At an example rate of $95 an hour: 1.5 × $95 = $142.50
- Total cost of the call: $142.50 + $18.24 = $160.74
Billing 30 minutes ($47.50) loses money on this call. A one-hour minimum plus a trip fee of at least $66, or a two-hour minimum ($190), covers it.
Nights, weekends and emergencies
- This Old House: an urgent call, especially on a night or weekend, adds at least $100–$200 to the standard fee[1].
- HomeGuide: 1 to 2+ times more on weekends, holidays or any time outside business hours, and $150–$200 an hour for emergency electricians[2].
Decide which you use, a flat surcharge or a multiplier, and quote it before you go. A dead circuit at 9 p.m. is the moment a customer will agree to almost anything and dispute it a week later, so text the after-hours terms, get a yes in writing, and show the premium as its own invoice line.
Where you work changes the rate
This Old House says electricians' hourly rates are higher where the cost of living is higher, such as New York or California, and that you may pay a travel fee when an electrician has to drive a long way to reach you[1]. Use the national ranges to sanity-check your rate, then price against the shops you actually compete with.
Permits and inspections: bill them, don't absorb them
Most states require electricians to pass a test and hold a license[3], and a lot of electrical work needs a permit and an inspection. The fees are set locally, so the published ranges are wide:
| Source | Permit | Other |
|---|---|---|
| HomeGuide[2] | Permit$50–$350, by project | Other— |
| This Old House[1] | Permit$75 for simple work to $900 for major rewiring on older homes | Other— |
Check your city or county's fee schedule: that's the number that goes on the estimate.
Put the permit and inspection on the estimate as pass-through lines, plus a line for your time to pull the permit and meet the inspector if you charge for it. Customers rarely argue with a fee they can see is the city's.
Setting your own rate
Know your break-even hour
Your pay target plus taxes, insurance, vehicle, tools and licensing, divided by the hours you can actually bill. The labor cost calculator does the math.
Set the minimum from the drive, not the job
Price the smallest call you'll take the way the example above does: travel time, mileage and the time on site.
Write the after-hours terms down
A multiplier or a flat surcharge, said the same way every time.
Price materials with a markup you can explain
Devices, wire and breakers at your price, the same markup on every job. The markup calculator shows the margin a markup gives.
Compare with your local market
The national ranges above are a check, not a target.
The longer walkthrough, with self-employment tax and billable hours, is in how to calculate your hourly rate.
On the estimate and invoice
List the service call or minimum, labor by task or by hour, devices and materials, and each permit or inspection fee on its own line. The electrical estimate template and electrical invoice template show it laid out. If you'd rather do it from the truck, Invoice Link keeps your minimum and common tasks as saved items, gets the estimate signed on your phone, and texts the invoice from your own number when you're done.
Before your next small call
- Minimum charge set from travel time and mileage
- Service call says whether it includes the first hour
- After-hours surcharge or multiplier written down
- Permit and inspection fees checked with the city
- Small jobs bundled into one visit where you can
- Materials marked up the same way on every job
Questions contractors ask
How much do electricians charge per hour?
Published 2026 cost guides put most electricians between about $40 and $130 an hour. This Old House lists apprentices at $40 to $60, journeymen at $60 to $90 and master electricians at $90 to $120 an hour, and HomeGuide's bands run a little higher.
Why do electricians charge a minimum?
Because travel, setup and cleanup cost the same whether the job takes ten minutes or an hour. This Old House says most electricians have a minimum price for small jobs, typically a flat rate equal to one to four hours, and HomeGuide puts a service call that includes the first hour at $100 to $200.
How much more does an emergency electrician cost?
This Old House says an urgent call, especially at night or on a weekend, adds at least $100 to $200 to the standard fee. HomeGuide says electricians charge 1 to 2 or more times as much outside regular business hours, and $150 to $200 an hour for emergency work.
Should I charge the customer for the permit?
Yes, as its own line on the estimate and invoice, at the fee the city or county charges. HomeGuide lists electrical permits at $50 to $350 depending on the project, and This Old House goes up to $900 for major rewiring on older homes, which is why the local fee schedule is the only number to use.
Do electricians in cities charge more?
Generally, yes. This Old House says electricians' hourly rates are higher in areas where the cost of living is higher, such as New York or California, and that a long drive can add a travel fee.
Sources
Every figure above links here. We checked each source on November 16, 2026; the date after each one is the source's own (its data period or its last update). Prices and rules change, so confirm with the source before you rely on a number.
- [1]This Old House: How Much Does an Electrician Cost?Updated June 5, 2026
- [2]HomeGuide: How Much Does An Electrician Cost Per Hour? (2026)Dated February 12, 2026
- [3]U.S. Bureau of Labor Statistics: Electricians (Occupational Outlook Handbook)May 2025 wage data; page last modified August 27, 2026
- [4]Internal Revenue Service: Standard mileage rates76¢ a mile for July 1–December 31, 2026 (72.5¢ before July 1); page last reviewed or updated July 28, 2026
How we made this guide
Every number on this page comes from a public source listed above: government data, building codes, manufacturers' published specs, or homeowner cost guides that publish what jobs cost. Cost guides survey different jobs in different places, so we show their ranges side by side with each publisher's own date instead of averaging them into a number of our own. Worked examples are labeled as examples, and their inputs are either cited or plainly made up for the math. We used AI tools to help research and draft this guide, and every figure was checked against its source in a separate fact-check pass before it was published. We didn't pay anyone quoted here, and there are no testimonials. Spot something wrong or out of date? Email support@invoicelinkapp.com.
Skip the paperwork
Quote the panel swap before you leave the house
Invoice Link builds the estimate on your phone with your saved prices and permit lines, gets it signed on the spot, and turns it into the invoice when the inspection passes.
- Texts estimates and invoices from your own phone number
- On-site customer signatures on estimates; job photos on estimates and invoices
- AI drafts estimates and invoices in English or Spanish
- Card and bank-transfer (ACH) payments for US businesses
- 10 contractor invoice designs
Free for 14 days
Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).
Start your free trialJust need a PDF? Use the free estimate maker.
Keep going
More guides
Free tools