Skip to main content

Free roofing estimate template

Roofing Estimate Template

Roofing is priced by the square, so most of a good estimate is getting the squares right — then writing down what happens with the things nobody can see until the old roof is off. This sample is a two-story re-roof with steep sections, a per-sheet decking price outside the total, and upgrades the customer can add with a checkmark.

By the Invoice Link team · Last updated

No sign-up. The Word file opens in Google Docs too: upload it to Google Drive, then choose Open with → Google Docs.

The filled-in sample

A re-roof estimate with measured squares including waste, a steep-slope charge, flashing and disposal on their own lines, and decking and shingle upgrades priced as options.

Slatewick Roofing

Licensed & insured · Lic. #RC-00000

6120 Old Mill Pkwy
Brookhollow, TN 37100
(615) 555-0137 · jobs@slatewick.example

Estimate

No.
EST-0958
Date
November 13, 2026
Valid until
December 13, 2026

Prepared for

Dale and Monique Ferris

12 Copper Kettle Ln
Brookhollow, TN 37100
(615) 555-0150 · ferrisfamily@example.com

Re-roof — two-story colonial, 6/12 and 10/12 pitch

Remove existing shingles down to the deck; inspect the deck and replace damaged sheets at the unit price below; install a new architectural shingle roof system with synthetic underlayment, ice and water shield at valleys and eaves, new drip edge and ridge ventilation; clean up daily.

DescriptionAmount
Tear-off, 1 layer
26 squares of roof surface
26 sq × $85.00
$2,210.00
Architectural shingle system, installed
28 squares measured including waste; synthetic underlayment, starter, hip and ridge
28 sq × $365.00
$10,220.00
Steep-slope charge, 10/12 sections
9 sq × $40.00
$360.00
Ice and water shield at valleys and eaves
6 roll × $95.00
$570.00
Drip edge
230 lin ft × $3.25
$747.50
Ridge vent
48 lin ft × $7.50
$360.00
Step and counter flashing at chimney and sidewalls
1 job × $650.00
$650.00
Dumpster, haul-off and magnetic nail sweep
1 job × $575.00
$575.00
Building permit (estimated, at cost)
1 ea × $140.00
$140.00
Subtotal
$15,832.50
Estimate total
$15,832.50
Deposit to order materials (30%)
$4,749.75
Optional — priced separately, not included in the total
DescriptionAmount
Decking replacement, 7/16-in. OSB — only sheets found damaged
Per sheet; you get photos and a count before we cover it
1 sheet × $78.00
$78.00
Upgrade to impact-resistant (Class 4) shingles
28 sq × $85.00
$2,380.00
New flashing kits for 2 skylights
2 ea × $240.00
$480.00

Notes and terms

  • Measurements: on-site measurement checked against an aerial report; squares include waste for hips, valleys and starter courses.
  • Not included: gutter replacement, fascia or soffit repair, interior drywall or paint repair.
  • Shingle color is chosen at signing. The manufacturer's warranty is registered in your name after installation.
  • Payment: 30% deposit at signing; balance within 7 days of completion.

How to pay: Deposit by bank transfer (ACH) or card through the pay link on your deposit invoice.

Customer signature — I accept this estimate and its terms

Date

Sample estimate — every name, address and price on it is fictional.Template from invoicelinkapp.com

Sample prices are illustrative, not a price guide. Replace them with your own rates.

How to measure a roof for an estimate

A square is 100 square feet of roof surface. Turn the house's footprint into roof area with the pitch factor, then add waste.

  • Measure the footprint including overhangs (or use an aerial measurement report), then multiply by the pitch factor below.
  • Add waste for cuts at hips, valleys, rakes and starter courses. Roofs with many valleys and dormers need more than simple gables.
  • Count layers to tear off and penetrations (pipes, vents, skylights, chimneys), and measure the eaves, rakes, valleys and ridge in linear feet.
  • Note steep sections and the number of stories; they change labor, safety equipment and staging.
Pitch factor: roof area = footprint area × factor
Pitch (rise per 12 in.)FactorA 1,000 sq ft footprint becomes
4/121.0541,054 sq ft
5/121.0831,083 sq ft
6/121.1181,118 sq ft
7/121.1581,158 sq ft
8/121.2021,202 sq ft
9/121.2501,250 sq ft
10/121.3021,302 sq ft
12/121.4141,414 sq ft
Factor = √(1 + (rise ÷ 12)²). It converts flat area to sloped roof area; waste is added after.

What to include in a roofing estimate

  • The whole system, not just shingles: underlayment type, where ice and water shield goes, drip edge, flashing, ventilation.
  • Decking as a per-sheet unit price, with the promise of photos and a count.
  • Shingle line and color, and which manufacturer warranty applies.
  • Your workmanship warranty and what voids it.
  • Cleanup: dumpster, nail sweep, protecting landscaping.
  • Exclusions: gutters, fascia, soffit, interior repairs, skylight replacement.
  • Deposit and the date the balance is due.

Upgrades worth quoting

Price your standard system in the total and list upgrades on their own lines: impact-resistant shingles in hail country, upgraded ventilation, new gutters or guards, skylight flashing or replacement while the roof is open.

Approved options carry over to the final invoice at the price on the estimate.

Before you send it

  • Squares with the pitch factor and waste applied
  • Layers, steep sections and stories noted
  • Decking unit price outside the total
  • Shingle line, color and warranties
  • Exclusions and cleanup
  • Deposit, balance date and validity date

Roofing estimate questions

How do I convert a roof's footprint to squares?

Multiply the footprint area by the pitch factor, add waste, and divide by 100. A 1,800 sq ft footprint at 6/12 pitch is about 2,012 sq ft of roof (1,800 × 1.118) — roughly 20 squares before waste.

Should decking be in the main price?

Quote it as a per-sheet unit price outside the total unless you can inspect the deck from the attic and are confident about its condition. The customer pays only for what's needed, and you don't eat the cost of hidden rot.

How do I write an estimate for an insurance claim?

Use the insurer's approved scope as the base and list anything beyond it separately for the homeowner to approve. Keep the claim number on the estimate, and don't offer anything that offsets the deductible.

What's the difference between a roofing estimate and a contract?

An estimate prices the job; a contract adds the terms both sides agree to — schedule, payment, warranty, change orders and any notices your state requires for home improvement work. Many roofers make the signed estimate the contract by including those terms and a signature line.

How should I present shingle options?

Put your standard shingle in the total and list upgrades — impact-resistant or designer lines — as optional lines priced per square, so the customer sees exactly what each upgrade adds.

How we made this template

The sample business, customer, addresses and prices are fictional; they show how a roofing estimate is laid out, not what to charge. We used AI tools to help draft and check this page; every rule or standard it names, and every number that isn't sample math, links to its source. Spot something wrong? Email support@invoicelinkapp.com.

Skip the paperwork

Send this estimate from your phone — and get it signed

Invoice Link builds an estimate like this on your phone in a couple of minutes, then texts it to your customer with a link to approve it.

  • Texts estimates and invoices from your own phone number
  • On-site customer signatures on estimates; job photos on estimates and invoices
  • AI drafts estimates and invoices in English or Spanish
  • Card and bank-transfer (ACH) payments for US businesses
  • 10 contractor invoice designs

Free for 14 days

Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).

Start your free trial
Download on the App StoreGet it on Google Play

Just need a PDF? Use the free estimate maker.

Our mission

Every tradesperson deserves to get paid the day the job is done.