Skip to main content

All trades · How-to

How much deposit should a contractor ask for? Typical amounts and state limits

Consumer advice keeps contractor deposits modest: the Ohio Attorney General calls a down payment of perhaps 20 percent reasonable[1], and a contractor quoted by This Old House suggests 10% at signing on large projects[2]. But in several states the law sets the ceiling: in California a home improvement down payment can't exceed $1,000 or 10% of the contract price, whichever is less[3], and Maryland caps deposits at one-third[4]. Here's what's typical, the state rules we checked, the federal three-day cancellation rule for sales made at the customer's home, and how to structure payments so a deposit isn't your only protection.

By the Invoice Link team · Reviewed · 13 sources

The short answer

Typical deposit
"Perhaps 20 percent" (Ohio Attorney General)[1]; 10% at signing on large projects (This Old House)[2]
Red flag for homeowners
Paying the full amount before the work is complete (Iowa Attorney General)[5]
California cap
$1,000 or 10% of the contract price, whichever is less[3]
Maryland, Massachusetts, Pennsylvania
One-third (Pennsylvania: contracts over $5,000), with special-order materials rules in MA and PA[4][6][7]
Cooling-Off Rule
3 business days to cancel most sales of $25 or more made at the buyer's home[8][9]

What's typical

What consumer guides and regulators tell homeowners
What consumer guides and regulators tell homeowners
Ohio Attorney General[1]What it saysA reasonable down payment, perhaps 20 percent; keep the final payment until the job is doneSource's dateNo date shown
This Old House[2]What it saysFor large projects, a contractor it quotes suggests 10% at signing, three 25% payments spread over the job, and 15% at completionSource's dateMay 25, 2026
Iowa Attorney General[5]What it saysAvoid paying the full amount before work is complete; get partial payments in writingSource's dateNo date shown

These are what homeowners are told before they hire you. A deposit inside these ranges reads as normal; one above them reads as a risk.

States that limit deposits

Some states write the limit into law for home improvement contracts. These are the ones we checked against official sources; others have rules too, so check yours.

Home improvement deposit rules, from official sources
Home improvement deposit rules, from official sources
CaliforniaRuleDown payment no more than $1,000 or 10% of the contract price, whichever is less, for home improvement and swimming pool jobs, with no exception for special-order materials[3]. The only exception is a contractor with a blanket performance and payment bond on file with CSLB[10]. A violation is punishable as a misdemeanor[11].
MarylandRuleNo payment before the contract is signed, and no deposit of more than one-third of the contract price before or at signing[4].
MassachusettsRuleA deposit no more than the greater of one-third of the total price or the actual cost of special-order or custom materials that must be ordered before work starts[6].
PennsylvaniaRuleOn contracts over $5,000, no deposit over one-third of the price, or one-third plus the cost of special-order materials designated in the contract[7].
New YorkRuleThe Attorney General's summary of the law lists no percentage cap. Instead, payments received before substantial completion go into an escrow account in a New York bank within five business days (and the customer is told where within ten), or the contractor gives the customer a bond within ten business days[12]. The law covers most improvements over $500[12].

Not legal advice. Rules change and have exceptions; confirm with your state's contractor board or attorney general before you write your contract.

Worked example

The same $18,000 kitchen job in four places (example)

  • California: 10% would be $1,800, but the cap is "whichever is less"[3] → $1,000
  • Maryland: up to one-third[4] → $6,000
  • Massachusetts with $7,500 of special-order cabinets: the greater of one-third ($6,000) or the cabinets[6] → $7,500
  • A state with no cap, from 10% at signing[2] to the 20 percent Ohio calls reasonable[1] → $1,800 to $3,600

Same job, deposits from $1,000 to $7,500. In California the rest has to come as progress payments for work done.

The FTC Cooling-Off Rule: three days to cancel

If you sell the job at the customer's home, federal law may give them time to change their mind. The FTC's Cooling-Off Rule lets the buyer cancel for a full refund until midnight of the third business day after the sale[8]. It covers sales of $25 or more made at the buyer's home and $130 or more made elsewhere away from the seller's place of business, such as the buyer's workplace or a hotel or fairground[9], and the seller must give the buyer a written notice of the right to cancel[9].

  • Emergencies are excluded only when the customer called you, the need is a real emergency, and they give you a handwritten, signed and dated statement waiving the three days[9].
  • Repair or maintenance visits the customer called you for (on their personal property) are excluded, but anything extra you sell during the visit (beyond the parts the repair needs) isn't[9].
  • Kitchen-table contracts for remodels, roofs and the like are the classic covered sale. Don't order materials or spend the deposit until the three days pass.

How to size your deposit

  1. Check your state's rule first

    If there's a cap, it overrides everything below.

  2. Cover what you'll spend before you start

    Special-order materials, a dumpster, a permit, a crew day you're turning down other work for. That's what a deposit is for; it isn't profit up front.

  3. Ask for the rest as progress payments

    Tie each payment to a milestone the customer can see (demo done, rough-in passed, cabinets installed), like This Old House's example schedule[2].

  4. Keep the final payment meaningful

    Big enough that you both care about the punch list, small enough that you're not financing the job.

  5. Put it all in writing

    The deposit amount, when it's due, what it's for, the payment schedule, and a receipt for every payment, which homeowners are told to ask for[1].

In California, the rule after the down payment matters as much as the cap: except for the down payment, a contractor can't demand or accept payment for work or materials until the work is done or the materials are delivered[13]. Build your schedule around that.

Small jobs and service calls

Most service and repair work doesn't need a deposit: the job is done in a visit and invoiced the same day. A deposit earns its keep when you're buying materials or holding days on your calendar. For small jobs, a trip charge or minimum and payment on completion do the same work with less paperwork.

Deposits on the estimate and invoice

  • The estimate states the deposit (percentage or amount), when it's due, and the progress payments after it.
  • Each invoice credits every payment received, with its date, and shows the balance.
  • In states with a required contract sentence, print it word for word: California requires, in at least 12-point bold type under the heading "Down Payment", "THE DOWN PAYMENT MAY NOT EXCEED $1,000 OR 10 PERCENT OF THE CONTRACT PRICE, WHICHEVER IS LESS." A contract with a progress-payment schedule needs CSLB's schedule statement too[11].

The roofing estimate template and painting estimate template both show a deposit request on a filled-in estimate. Both samples ask for 30% at signing, which fits under a one-third cap but not in California, where the most is $1,000 or 10%, whichever is less[3]. Invoice Link lets you set a deposit as a percentage or a flat amount and sends the customer a link to pay it by card or bank transfer (US businesses); partial payments are tracked automatically, so every invoice shows what's been paid and what's still due.

Before you ask for a deposit

  • Your state's deposit rule checked
  • Deposit sized to upfront costs, not profit
  • Progress payments tied to visible milestones
  • Cancellation notice given for at-home sales
  • Materials not ordered until any cancel window passes
  • Deposit and schedule written on the estimate
  • Receipt sent for every payment

Questions contractors ask

How much deposit should a contractor ask for?

Consumer advice keeps it modest: the Ohio Attorney General calls perhaps 20 percent reasonable, and a contractor quoted by This Old House suggests 10% at signing on large projects. Size yours to what you must spend before starting, like special-order materials, and check your state's limit first.

What is the maximum deposit a contractor can take in California?

For home improvement and swimming pool contracts, $1,000 or 10% of the contract price, whichever is less, with no exception for special-order materials. The only exception is a contractor with a blanket performance and payment bond on file with the Contractors State License Board.

Can a contractor ask for 50% up front?

It depends on the state. California caps a home improvement down payment at $1,000 or 10%, whichever is less; Maryland at one-third; Pennsylvania (contracts over $5,000) at one-third plus any special-order materials named in the contract; Massachusetts at one-third or the cost of special-order materials, whichever is greater. Where it's legal, half up front is still far above the 20 percent the Ohio Attorney General calls reasonable.

Can a customer cancel after paying a deposit?

Under the FTC's Cooling-Off Rule, a buyer can cancel most sales of $25 or more made at their home until midnight of the third business day after the sale and get a full refund. Emergencies (with the customer's handwritten waiver) and repair visits the customer called for are excluded.

Does New York limit contractor deposits?

The New York Attorney General's summary lists no percentage cap. Instead, the law requires payments received before substantial completion to go into an escrow account in a New York bank within five business days, or the contractor must give the customer a bond within ten business days.

Sources

Every figure above links here. We checked each source on November 16, 2026; the date after each one is the source's own (its data period or its last update). Prices and rules change, so confirm with the source before you rely on a number.

  1. [1]Ohio Attorney General: A home improvement contractor asked me for payment upfront. Should I pay?No date shown; read November 16, 2026
  2. [2]This Old House: 8 Pro Tips on How to Hire a ContractorUpdated May 25, 2026
  3. [3]California Contractors State License Board: Learn About Home Improvement ContractsNo date shown; read November 16, 2026
  4. [4]Maryland General Assembly: Business Regulation § 8-617Current statute text (no date shown); read November 16, 2026
  5. [5]Iowa Attorney General: Home Improvement & Contractor TipsNo date shown; read November 16, 2026
  6. [6]The General Court of the Commonwealth of Massachusetts: General Laws, Chapter 142A, Section 2: Residential contracting agreementsCurrent statute text (no date shown); read November 16, 2026
  7. [7]Pennsylvania Office of Attorney General: Home Improvement Consumer Protection Act, 73 P.S. § 517.1 et seq.No date shown (file created December 16, 2014); read November 16, 2026
  8. [8]Federal Trade Commission: Buyer's Remorse: The FTC's Cooling-Off Rule May HelpSeptember 2025
  9. [9]Electronic Code of Federal Regulations: 16 CFR Part 429: Rule Concerning Cooling-off Period for Sales Made at Homes or at Certain Other LocationsUp to date as of November 12, 2026
  10. [10]California Contractors State License Board: What should I look for in a contract and binding agreements?No date shown; read November 16, 2026
  11. [11]California Contractors State License Board: CSLB Reminds Contractors of Progress Payment Restrictions (Industry Bulletin #22-14)November 22, 2022
  12. [12]New York State Office of the Attorney General: Home Improvement Fact SheetNo date shown; read November 16, 2026
  13. [13]California Contractors State License Board: Contracting for SuccessNo date shown on the PDF (file last modified June 6, 2020); read November 16, 2026

How we made this guide

Every number on this page comes from a public source listed above: government data, building codes, manufacturers' published specs, or homeowner cost guides that publish what jobs cost. Cost guides survey different jobs in different places, so we show their ranges side by side with each publisher's own date instead of averaging them into a number of our own. Worked examples are labeled as examples, and their inputs are either cited or plainly made up for the math. We used AI tools to help research and draft this guide, and every figure was checked against its source in a separate fact-check pass before it was published. We didn't pay anyone quoted here, and there are no testimonials. Spot something wrong or out of date? Email support@invoicelinkapp.com.

Skip the paperwork

Ask for the deposit with the estimate

Invoice Link sets the deposit as a percentage or a flat amount, sends the customer a link to pay it, and keeps track of every partial payment until the balance clears.

  • Texts estimates and invoices from your own phone number
  • On-site customer signatures on estimates; job photos on estimates and invoices
  • AI drafts estimates and invoices in English or Spanish
  • Card and bank-transfer (ACH) payments for US businesses
  • 10 contractor invoice designs

Free for 14 days

Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).

Start your free trial
Download on the App StoreGet it on Google Play

Just need a PDF? Use the free estimate maker.

Our mission

Every tradesperson deserves to get paid the day the job is done.