Plumbing · Pricing guide
Plumber hourly rate: what plumbers charge in 2026 and how to set yours
This Old House's 2026 cost guide puts plumbers at $25 to $200 an hour, about $100 on average plus a service fee or minimum charge[1], with master plumbers at the top of that range. Those are billing rates: what customers pay. The median employee plumber earned $30.67 an hour in May 2025[2], and the gap between the two numbers is what pays for the van, the insurance and the hours nobody pays for. Here's what the published ranges say, what moves a plumber's rate, and how to set your own.
By the Invoice Link team · Reviewed · 6 sources
The short answer
- Typical hourly rate
- $25–$200 an hour, about $100 on average (This Old House)[1]; $90–$147 on average (Thumbtack)[3]
- By license level
- Journeyman about $50–$100, master $75–$200 an hour (This Old House)[1]; apprentice $20–$40 (Fixr)[4]
- Service call fee
- $50–$300: $50–$150 for journeymen, $150–$300 for master plumbers (Fixr)[4]
- After hours
- A flat emergency fee plus about $150 an hour (This Old House)[1]; sometimes double the hourly fee at night (Thumbtack)[3]
- Employee wage (not a billing rate)
- $30.67 an hour median, May 2025[2]
What plumbers charge per hour in 2026
Three consumer cost guides publish plumber hourly rates. They don't agree to the dollar, so here they are side by side with each one's date. This Old House doesn't say where its plumbing figures come from, and Fixr's guide is older than the other two.
| Source | Hourly range | Typical or average | Source's date |
|---|---|---|---|
| This Old House[1] | Hourly range$25–$200 | Typical or averageAbout $100, plus a service fee or minimum | Source's dateJun 6, 2026 |
| Thumbtack (emergency-plumber guide)[3] | Hourly range$50–$225 | Typical or average$90–$147 on average, nationally | Source's dateJul 8, 2026 |
| Fixr[4] | Hourly range$75–$150 | Typical or average$90 on average for a journeyman | Source's dateJan 30, 2025 |
Billing rates customers pay, as each publisher reports them. They aren't wages, and they don't include materials. Thumbtack prints its hourly figures on its emergency-plumber page; its main plumber guide gives job totals only.
The wage side looks very different. The Bureau of Labor Statistics put the median plumber, pipefitter and steamfitter at $63,800 a year ($30.67 an hour) in May 2025, with the lowest 10% under $44,150 and the top 10% over $108,420[2]. Those figures cover employees only; BLS doesn't collect pay for self-employed workers[2]. If you work for yourself, your rate has to cover your own pay plus everything an employer would normally pay for, which is why published billing rates sit so far above the wage.
Service call fees, trip charges and minimums
Almost every plumber charges something just for showing up: This Old House's national average comes plus a service fee or minimum charge[1]. How it's structured varies:
- A service call fee. Fixr puts the initial fee for a service call at $50–$300: $50–$150 for journeyman plumbers and $150–$300 for masters[4]. Say whether it includes the first hour or only the diagnosis.
- A trip fee on top of labor. Customers in very remote locations may pay travel fees[1]; on emergency calls Fixr puts transportation fees at $50–$200[4].
- A flat fee for the first two hours, then hourly pricing, which Fixr says some plumbers use[4]. Others bill a minimum, so a 15-minute fix still pays for the visit.
Pick one structure and say it in writing before you roll: in the booking text, on the estimate and as the first line of the invoice. "Service call, includes first hour" on its own line stops the "you were only here 20 minutes" argument. If you credit the fee toward the repair when the customer goes ahead, say that too.
After-hours, weekend and emergency rates
All the guides agree that nights, weekends and emergencies cost more. They differ on how it's charged:
| Source | What it says | Source's date |
|---|---|---|
| This Old House[1] | What it saysA flat emergency fee plus a higher rate, usually around $150 an hour; more in busy seasons, like freezing winters | Source's dateJun 6, 2026 |
| Thumbtack (emergency-plumber guide)[3] | What it saysMiddle-of-the-night calls sometimes cost double the hourly fee | Source's dateJul 8, 2026 |
| Fixr[4] | What it saysAround $150 an hour, plus a $50–$200 transportation fee and a $200–$300 emergency call-out fee | Source's dateJan 30, 2025 |
Each publisher's own data, as of the date shown. Check them against what shops near you charge after hours.
Whatever multiplier you use, text it to the customer before you dispatch and put it on the invoice as its own line ("After-hours premium, 1.5× labor") rather than burying it in a bigger hourly number. Customers accept a premium they agreed to at 11 p.m.; they dispute one they find on the bill.
Hourly or flat rate?
Most plumbers bill by the hour, This Old House says[1], and some charge a flat fee for the first two hours of a job before hourly pricing kicks in[4].
- Flat rate works for jobs you've done fifty times: a faucet cartridge, a wax ring, a disposal swap. You keep the upside when you're fast, and the customer knows the price before you start.
- Hourly works for diagnosis and anything behind a wall. Quote the rate and the minimum, then an estimate for the fix once you can see it.
- Many shops mix them: a flat-rate menu for the common jobs and an hourly rate with a minimum for everything else.
Keep your flat-rate menu where you write estimates. In Invoice Link you can save each task in your catalog with your price on it, so the drain-clearing price is the same on Tuesday's estimate as on Friday's invoice.
What moves a plumber's rate
- License level. Masters bill the most; This Old House puts journeymen at about $50–$100 an hour and masters at $75–$200[1].
- Overhead. Plumbing is a specialized trade that requires training, licensing and tools[1], and the hourly rate pays for all of them along with insurance, the vehicle and the hours you can't bill.
- Timing. Evenings, weekends and holidays carry the premiums above.
- Distance. Customers in very remote locations may pay travel fees[1], and emergency calls often add a transportation fee[4].
- Your market. Plumbing usually costs more in urban areas, where demand is high[1]. Even among employee plumbers nationwide, the lowest-paid 10% earn under $44,150 a year and the top 10% over $108,420[2].
How to set your own plumbing rate
Start from the pay you want
Use a real number, such as what you'd earn working for a shop in your area.
Add what an employer would have paid on top
Benefits were 30.0% of private employers' compensation costs in June 2026, wages the other 70.0%[5]. That 30% includes the employer's half of Social Security and Medicare. Self-employed, you pay both halves through self-employment tax, 15.3% in all[6], so dividing your pay by 0.70 already covers it.
Add your overhead
Van, fuel, insurance, tools, phone, software, licenses and continuing education, for a year.
Divide by billable hours, not 2,080
Drive time, estimates, supply runs and paperwork aren't billable. Count only the hours you can invoice.
Add profit, then check the market
Price above break-even, then compare with the published ranges above and with what local shops charge.
Worked example
A solo plumber's rate (example inputs, not a price guide)
- Pay target: $63,800 a year, the May 2025 median plumber wage[2]
- Scaled up for benefits the way employers' costs are (wages 70.0% of the total)[5]: $63,800 ÷ 0.70 = $91,143
- Overhead (example): $30,000 a year for the van, fuel, insurance, tools and phone
- Total to cover: $91,143 + $30,000 = $121,143
- Billable hours (example): 1,400 a year, about 27 a week
- Break-even: $121,143 ÷ 1,400 = $86.53 an hour
- With a 15% profit margin: $86.53 ÷ 0.85 = $101.80
About $102 an hour, inside This Old House's $25–$200[1] and Fixr's $75–$150[4]. Run your own numbers in the labor cost calculator: a labor burden of about 43% is the same as dividing by 0.70.
For the full method (self-employment tax, billable hours and a markup-versus-margin check) see how to calculate your hourly rate.
Putting it on the estimate and the invoice
- One line for the service call or trip fee, saying what it includes.
- Labor as hours × your rate, or the flat-rate task name and price.
- Any after-hours premium as its own line.
- Parts and materials listed separately at the price you charge, with receipts kept for anything billed at cost.
- Permit fees passed through as their own line.
The plumbing estimate template and plumbing invoice template show that layout filled in. To send it from the job, Invoice Link turns the signed estimate into the invoice in two taps and texts it from your own number with a link to pay by card or bank transfer (US businesses).
Before you quote your next call
- Your hourly rate and minimum written down
- Service call fee says what it covers
- Trip-fee zone set in miles
- After-hours multiplier agreed before you dispatch
- One markup used for parts, on estimate and invoice
- Flat prices saved for the jobs you repeat
- Permit fees on their own line
Questions contractors ask
How much do plumbers charge per hour?
This Old House's 2026 guide puts plumbing rates at $25 to $200 an hour, about $100 on average plus a service fee or minimum charge, with journeymen at about $50 to $100 and master plumbers at $75 to $200. Emergency and after-hours work costs more.
What's the difference between a plumber's wage and a plumber's rate?
The wage is what an employee plumber is paid: the Bureau of Labor Statistics put the median at $30.67 an hour in May 2025. The rate is what the customer is billed, and it also has to cover the employer's taxes and benefits, the vehicle, insurance, tools and the hours that can't be billed.
Should a plumber charge a service call fee?
Most do. Fixr puts the initial service-call fee at $50 to $300, lower for journeymen and higher for master plumbers. Say in the booking text and on the estimate what the fee covers and whether it's credited toward the repair.
How much more do plumbers charge after hours?
This Old House says emergency calls usually carry a flat emergency fee plus a higher rate of around $150 an hour, and Thumbtack says middle-of-the-night calls sometimes cost double the hourly fee. Tell the customer the after-hours rate before you dispatch, and show it as its own line on the invoice.
Is it better to charge hourly or a flat rate?
Flat rates suit jobs you can predict, like a faucet cartridge or a toilet rebuild. Hourly suits diagnosis and open-ended work. Many plumbers use both: a flat-rate menu for common jobs plus an hourly rate with a minimum for everything else.
Do plumbers charge for parts separately?
Usually, yes. List parts and materials as their own lines at the price you charge, keep the receipts, and use the same markup on the estimate and the invoice so the customer sees no surprises.
Sources
Every figure above links here. We checked each source on November 16, 2026; the date after each one is the source's own (its data period or its last update). Prices and rules change, so confirm with the source before you rely on a number.
- [1]This Old House: Plumbing Cost Guide: Repairs and InstallationsUpdated June 6, 2026
- [2]U.S. Bureau of Labor Statistics: Plumbers, Pipefitters, and Steamfitters (Occupational Outlook Handbook)May 2025 wage data; page last modified October 29, 2026
- [3]Thumbtack: How much do emergency plumbers cost?Last updated July 8, 2026 (Thumbtack's own data)
- [4]Fixr: Cost to Hire a Plumber | Plumber Rate per HourUpdated January 30, 2025
- [5]U.S. Bureau of Labor Statistics: Employer Costs for Employee Compensation — June 2026 (USDL-26-1494)June 2026 data; released September 9, 2026
- [6]Internal Revenue Service: Self-employment tax (Social Security and Medicare taxes)Page last reviewed or updated October 30, 2026
How we made this guide
Every number on this page comes from a public source listed above: government data, building codes, manufacturers' published specs, or homeowner cost guides that publish what jobs cost. Cost guides survey different jobs in different places, so we show their ranges side by side with each publisher's own date instead of averaging them into a number of our own. Worked examples are labeled as examples, and their inputs are either cited or plainly made up for the math. We used AI tools to help research and draft this guide, and every figure was checked against its source in a separate fact-check pass before it was published. We didn't pay anyone quoted here, and there are no testimonials. Spot something wrong or out of date? Email support@invoicelinkapp.com.
Skip the paperwork
Bill the call before you leave the driveway
Invoice Link puts your service call, labor and parts on a clean invoice in a couple of minutes, then texts it from your own number with a link to pay by card or bank transfer (US businesses).
- Texts estimates and invoices from your own phone number
- On-site customer signatures on estimates; job photos on estimates and invoices
- AI drafts estimates and invoices in English or Spanish
- Card and bank-transfer (ACH) payments for US businesses
- 10 contractor invoice designs
Free for 14 days
Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).
Start your free trialJust need a PDF? Use the free invoice generator.
Keep going
More guides
Free tools