All trades · How-to
How to calculate your hourly rate as a contractor
Your hourly rate has to cover four things: the pay you'd earn in a job, the benefits and taxes an employer would have paid on top, the costs of running the business, and a profit, all divided by the hours you can actually bill, which is far fewer than 2,080. In private industry, benefits were 30.0% of employers' compensation costs in June 2026[1], and self-employed people pay both halves of Social Security and Medicare, 15.3%[2]. Here's the method step by step, with a worked example that lands on a real number.
By the Invoice Link team · Reviewed · 9 sources
The short answer
Step 1: Start with the pay you want
Use a real number: what you'd earn working for a good shop in your area, or what you need to take home. BLS publishes median wages for most trades (the guides for plumbers, electricians and HVAC quote them), but those are employee wages and don't include pay for self-employed workers[5]. They're a floor for your pay, not your rate.
Step 2: Add what an employer would have paid
A job pays more than the paycheck. In June 2026, private employers' compensation costs averaged $46.89 an hour: wages $32.82 (70.0%) and benefits $14.07 (30.0%)[1]. In the construction industry the split was nearly the same, $51.96 an hour in total with benefits at 30.5%[6]. Those benefits are paid leave, supplemental pay such as overtime and bonuses, insurance, retirement, and legally required costs like the employer's Social Security and Medicare, unemployment insurance and workers' comp[7]. When you work for yourself, you pay all of it.
- Self-employment tax replaces the Social Security and Medicare an employer would split with you: 15.3% in all, 12.4% for Social Security and 2.9% for Medicare[2], usually on 92.35% of your net earnings[3].
- The Social Security part stops at a cap: for 2026, the first $184,500 of combined wages and self-employment earnings[2].
- Half of it is deductible when you figure your adjusted gross income[3].
- Health insurance, retirement and time off are now yours to fund too.
The simple way to cover all of it: divide your pay target by 0.70, the wage share of employer costs[1]. That turns "pay" into "pay plus the benefits a job would have come with".
Step 3: Add up your overhead for a year
- Vehicle. The IRS business mileage rate is a fair stand-in for what driving costs: 76¢ a mile for July 1 to December 31, 2026, and 72.5¢ before that[4]. Multiply by your yearly business miles.
- Insurance: general liability, commercial auto, tools coverage, and workers' comp if you need it.
- Tools and equipment, including what wears out and what you'll replace this year.
- Phone, software and payment fees.
- Licenses, permits you don't pass through, continuing education and accounting.
- Marketing: signs, website, listings.
Step 4: Count the hours you can actually bill
This is where most rates go wrong. 52 weeks × 40 hours is 2,080 hours, but you won't invoice anywhere near that. Take out vacation, holidays and sick days, then the hours that are work but not billable: driving between jobs, estimates that don't close, supply-house runs, invoicing and bookkeeping. We couldn't find a government source that publishes a "normal" billable share for solo contractors, so track your own for a month. Until then, assume something conservative.
Worked example
Billable hours (example inputs)
- 52 weeks − 4 weeks of vacation, holidays and sick days = 48 working weeks
- 48 × 40 hours = 1,920 working hours
- Billable share (example): 70%, with the rest driving, quoting and paperwork
- 1,920 × 0.70 = 1,344 billable hours
1,344 billable hours a year, about 65% of 2,080.
Step 5: Put it together (a worked example)
Worked example
A solo contractor's hourly rate (example inputs except the cited rates)
- Pay target (example): $60,000 a year
- Plus benefits, the employer way: $60,000 ÷ 0.70[1] = $85,714
- Vehicle: 15,000 business miles × $0.76[4] = $11,400
- Insurance $3,600 + tools $2,400 + phone and software $1,200 + accounting and licenses $1,500 + marketing $1,800 = $10,500 (examples)
- Overhead total: $11,400 + $10,500 = $21,900
- Cost to cover: $85,714 + $21,900 = $107,614
- Break-even rate: $107,614 ÷ 1,344 billable hours = $80.07 an hour
- With a 15% profit margin: $80.07 ÷ (1 − 0.15) = $94.20 an hour
About $94 an hour, before materials and before any trip charges. Try your own numbers in the free labor cost calculator: enter your pay as an hourly wage (yearly pay ÷ 2,080), a labor burden of about 43% (the same as dividing by 0.70), 40 paid hours a week, your billable share of all 52 weeks (1,344 ÷ 2,080, about 65% here, because the calculator counts vacation weeks as paid hours) and your overhead per month ($21,900 ÷ 12 = $1,825). With these inputs it also says $94.
Worked example
The same example at 60% billable
- Billable hours: 1,920 × 0.60 = 1,152
- Break-even: $107,614 ÷ 1,152 = $93.41 an hour
- With a 15% profit margin: $93.41 ÷ 0.85 = $109.89 an hour
Ten points of billable time move the rate by about $16 an hour. Billable hours move the answer more than anything else, so tracking where your hours go is the cheapest raise you'll ever get.
Step 6: Profit: margin is not markup
To earn a 15% margin you divide cost by 0.85, which is a 17.6% markup, not 15%. The same mix-up applies to materials. Common pairs (plain arithmetic: markup = margin ÷ (1 − margin)):
| Profit margin | Markup on cost |
|---|---|
| 10% | Markup on cost11.1% |
| 15% | Markup on cost17.6% |
| 20% | Markup on cost25.0% |
| 25% | Markup on cost33.3% |
| 30% | Markup on cost42.9% |
The markup calculator works out either one from the other.
Step 7: Check it against your market
Your break-even is a floor you can't go under; the market decides how far above it you can price. Compare your number with what customers in your trade are quoted. The guides for plumbers, electricians, painters, handymen and lawn care collect the published ranges side by side. If your break-even sits above the local market, the fix is usually more billable hours or a tighter service area, not a lower rate.
If you hire help
An employee costs more than their wage. On top of pay, the employer pays 6.2% Social Security and 1.45% Medicare[8], and federal unemployment tax of 6.0% on the first $7,000 of each employee's wages, which drops to 0.6% with the full credit for state unemployment tax[9]. Add state unemployment tax, workers' compensation and any benefits, and price the helper's hours with all of that in, the way BLS's construction figures do: $51.96 an hour of total cost against $36.13 of wages in June 2026[6].
Using your rate every day
Once you have the number, use it everywhere: price flat-rate tasks as time × rate, set your minimum from the drive time, and charge for estimates that take real work. In Invoice Link, save your rate and your common tasks in your catalog so you can add them to any estimate in one tap. The reports show what you've actually invoiced and been paid; divide that by your rate to check the billable hours you assumed.
Before you set your rate
- Pay target based on real local wages
- Benefits and self-employment tax covered
- A year of overhead added up, vehicle included
- Billable hours counted, not 2,080
- Profit margin converted to the right markup
- Rate checked against your local market
- Rate reviewed every year
Questions contractors ask
How do I calculate my hourly rate as a contractor?
Divide your pay target by 0.70 to add the benefits a job would include (wages were 70% of private employers' compensation costs in June 2026, according to BLS), add a year of overhead, divide by the hours you can actually bill, then divide by one minus your profit margin.
How many billable hours does a contractor have in a year?
There's no official figure. Full time is 2,080 hours, but after vacation, holidays and sick days, and the time spent driving, quoting and doing paperwork, a solo contractor bills far fewer. Track your own; until then a conservative assumption, such as 70% of 48 weeks of 40 hours, which is 1,344 hours, is safer than 2,080.
How much self-employment tax do I need to cover in my rate?
According to the IRS, self-employment tax is 15.3%: 12.4% for Social Security and 2.9% for Medicare, generally on 92.35% of your net earnings. For 2026 the Social Security part applies to the first $184,500 of combined earnings, and half of the tax is deductible when you figure your adjusted gross income.
What's the difference between markup and margin?
Markup is profit as a share of cost; margin is profit as a share of price. A 15% margin needs a 17.6% markup, and a 25% margin a 33.3% markup.
Why is my rate so much higher than the BLS wage for my trade?
Because BLS wages are what employees are paid, and they leave out self-employed workers. Your rate also pays for the benefits, taxes, vehicle, tools, insurance and unbilled hours an employer would otherwise cover.
Sources
Every figure above links here. We checked each source on November 16, 2026; the date after each one is the source's own (its data period or its last update). Prices and rules change, so confirm with the source before you rely on a number.
- [1]U.S. Bureau of Labor Statistics: Employer Costs for Employee Compensation — June 2026 (USDL-26-1494)June 2026 data; released September 9, 2026
- [2]Internal Revenue Service: Self-employment tax (Social Security and Medicare taxes)Page last reviewed or updated October 30, 2026
- [3]Internal Revenue Service: Topic no. 554, Self-employment taxPage last reviewed or updated November 9, 2026
- [4]Internal Revenue Service: Standard mileage rates76¢ a mile for July 1–December 31, 2026 (72.5¢ before July 1); page last reviewed or updated July 28, 2026
- [5]U.S. Bureau of Labor Statistics: Plumbers, Pipefitters, and Steamfitters (Occupational Outlook Handbook), Pay tabMay 2025 wage data; page last modified October 29, 2026
- [6]U.S. Bureau of Labor Statistics: Table 4. Employer Costs for Employee Compensation for private industry workers by occupational and industry groupJune 2026 data; released September 9, 2026
- [7]U.S. Bureau of Labor Statistics: Employer Costs for Employee Compensation — Technical Note (what each benefit category includes)Technical note to the June 2026 release; read November 17, 2026
- [8]Internal Revenue Service: Topic no. 751, Social Security and Medicare withholding ratesPage last reviewed or updated November 9, 2026
- [9]Internal Revenue Service: Topic no. 759, Form 940, Employer's Annual Federal Unemployment (FUTA) Tax ReturnPage last reviewed or updated November 9, 2026
How we made this guide
Every number on this page comes from a public source listed above: government data, building codes, manufacturers' published specs, or homeowner cost guides that publish what jobs cost. Cost guides survey different jobs in different places, so we show their ranges side by side with each publisher's own date instead of averaging them into a number of our own. Worked examples are labeled as examples, and their inputs are either cited or plainly made up for the math. We used AI tools to help research and draft this guide, and every figure was checked against its source in a separate fact-check pass before it was published. We didn't pay anyone quoted here, and there are no testimonials. Spot something wrong or out of date? Email support@invoicelinkapp.com.
Skip the paperwork
Put your rate to work on every estimate
Invoice Link keeps your rate and your common tasks in your catalog, so every estimate and invoice can use the numbers you worked out in one tap.
- Texts estimates and invoices from your own phone number
- On-site customer signatures on estimates; job photos on estimates and invoices
- AI drafts estimates and invoices in English or Spanish
- Card and bank-transfer (ACH) payments for US businesses
- 10 contractor invoice designs
Free for 14 days
Every Pro feature, no invoice or estimate limit, no card needed. Then Pro is US$8.99/wk or US$94.99/yr (US prices; see pricing).
Start your free trialKeep going
More guides
Templates
Free tools